Vaping Kit -- Geekvape B60 Boost 2 Kit Silver (CRC)

Description

GEEKVAPE B60 BOOST 2 STARTER KIT [CRC] is the new and updated version of the highly sought after Aegis BOOST PLUS. GEEKVAPE B60 BOOST 2 STARTER KIT [CRC] is now powered by a 2000mAh built-in battery with a 60W max output. It's equipped with a Geek Vape signature Military Grade IP67 Shockproof, Dustproof and Waterproof rating. Constructed from durable zinc-alloy, the GEEKVAPE B60 BOOST 2 STARTER KIT [CRC] can withstand dust, drops, and water, preventing it from malfunctioning due to environmental and user errors.  The new Coil Formula allows users to chase the best flavor and stunningly leakproof design and is capable of bringing out the best flavor from most vape juice.

Geekvape Aegis Boost Specifications

• Output Power: 5W-60W
• Maximum Output Current: 20A
• Maximum Output Voltage: 7.5V
• Power Display: Battery icon on the screen
• Charging Port: Type-C Port
• Resistance Range of Cartridge: 0.2 ohm - 2 ohm
• Battery Specification: Built-in 2000mAh battery
• Display Screen: 0.96 inch, TFT color screen
• Operating Temperature: 0°C~45°C
• Storage Temperature:-20°C~60°C
• Relative Humidity: 10%RH70%RH
• Cooling Mode: Natural cooling
• Top Airflow Leakproof Design
• Powered By AS Chip
• IP68 Rating
• 0.96" LED Curved Display
• Brand-new UI

• 1 x GEEKVAPE B60 BOOST 2 STARTER KIT [CRC] MOD
• 1 x GEEKVAPE B60 BOOST 2 EMPTY REPLACEMENT POD [CRC]- 5ML
• 1 x GEEKVAPE AEGIS BOOST/BOOST PLUS G COIL-0.2OHM (Pre-installed)
• 1 x GEEKVAPE AEGIS BOOST/BOOST PLUS G COIL-0.6OHM
• 1 x Coil Tool
• 1 x TYPE-C USB cable

Tips & Tricks

Batteries

Do not over-tighten your batteries onto your clearomizers. Finger tight only.

Over-tightening will cause damage to the battery and your warranty could be void.

Regularly clean the contact points of your batteries.

Never keep batteries loose in your pocket or bag where they could short circuit.

Don't heat or incinerate batteries.

Use only the correct charger for the batteries.

Please dispose of batteries safely and according to the regulations.

Clearomizers & Atomizers

Do not over-tighten atomizers into the clearomizers, you only need to tighten until contact is made. Finger tight only.

Over-tightening will cause damage to the atomizer, cause leaking and your warranty could be void.

Do not over-tighten clearomizers onto any device, you only need to tighten until contact is made. Finger tight only.

Over-tightening will cause damage to the clearomizer and or device, cause leaking and your warranty could be void.

Always clean your clearomizers, atomizers and drip tips on regular basis using luke warm water.

Clean Vaping is Happy Vaping.

Charging

When charging batteries via USB do not over-tighten them in the charging lead.

Over-tightening will cause damage to the charger and or battery and your warranty could be void.

Never place the charger on flammable surfaces when charging.

Do not over-charge or over-discharge any batteries.

Remove the battery from the charger as soon as your battery is fully charged.

Never leave batteries unattended when charging, especially overnight while sleeping.

Disclaimer

Click here to view the disclaimer.