Box Mod Kit -- Wismec SINUOUS FJ200 Kit Black
DescriptionWismec Sinuous FJ200 Kit
The Wismec Sinuous FJ200 is a high powered device that can fire up to 200 watts and with its built-in 4600 mAh battery, is incredibly long lasting.
The Wismec Sinuous FJ200 features temperature control modes that are compatible with Nickel, Titanium, and Stainless Steel 316 wire. Temperature Coefficient of Resistance (TCR) mode and preheat functionality are also featured as well.
The Wismec Sinuous FJ200 features a hidden side button which is both simple and easy to use.
The Sinuous FJ200 features a large 1.3" OLED display screen with a detailed interface.
The Sinuous FJ200 can also be upgraded via firmware and may be charged via the included micro USB cable.
The Wismec Divider Tank features a 2.0ml juice capacity (4.0ml max capacity without pre-installed silicone plug) that may be filled from the top.
The retractable top fill design allows for easy refills and minimizes leaks.
The Wismec Divider utilizes wide dual airflow slots
that may be adjusted down to your personal preferences.
Features and Specs for Wismec Sinuous FJ200 Mod:
- Designed by Sinuous Designs
- Fits 28mm and Smaller Tanks
- Dimensions: 3-3/16" x 1-3/4" x 1-1/16" (Without Tank)
- Spring Loaded 510 Contact Pin
- Centered 510 Connector Design
- Built-in Battery Capacity: 4600mAh
- Operating Wattage: 1.0 - 200.0W
- Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
- Temperature Control: 100 - 315C / 200 - 600 F
- Resistance: 0.1 – 3.5 ohm in Variable Wattage
- Resistance: 0.05 - 1.5 ohm in Temperature Control Mode
- Stealth Function
- Preheat Function
- 1.3" OLED Display Screen
- Hidden Side Fire Button
- Micro USB Charging Port
- Dual Circuit Protection
- Short Circuit Protection
- Low Voltage Protection
- Dimensions: 1-13/16" x 15/16" (Including Drip Tip and Threads)
- Diameter: 28mm
- 510 Threaded
- 2.0ml e-Liquid Capacity (4.0ml Max Capacity without Pre-installed Silicone Plug)
- Glass Tank
- Retractable Top Fill Design
- Dual Airflow Slots
- Adjustable Airflow Control Valve
- 510 Drip Tip Compatible
Each Kit Contains:
1 x Wismec Divider Sub-Ohm Tank
1 x WS01 Triple 0.2ohm Atomizer Head
1 x WS02 Triple 0.25ohm Atomizer Head
1 x Replacement Glass
1 x Set of Spare O-Rings
1 x Micro USB Cable
Tips & Tricks
Do not over-tighten your batteries onto your clearomizers. Finger tight only.
Over-tightening will cause damage to the battery and your warranty could be void.
Regularly clean the contact points of your batteries.
Never keep batteries loose in your pocket or bag where they could short circuit.
Don't heat or incinerate batteries.
Use only the correct charger for the batteries.
Please dispose of batteries safely and according to the regulations.
Clearomizers & Atomizers
Do not over-tighten atomizers into the clearomizers, you only need to tighten until contact is made. Finger tight only.
Over-tightening will cause damage to the atomizer, cause leaking and your warranty could be void.
Do not over-tighten clearomizers onto any device, you only need to tighten until contact is made. Finger tight only.
Over-tightening will cause damage to the clearomizer and or device, cause leaking and your warranty could be void.
Always clean your clearomizers, atomizers and drip tips on regular basis using luke warm water.
Clean Vaping is Happy Vaping.
When charging batteries via USB do not over-tighten them in the charging lead.
Over-tightening will cause damage to the charger and or battery and your warranty could be void.
Never place the charger on flammable surfaces when charging.
Do not over-charge or over-discharge any batteries.
Remove the battery from the charger as soon as your battery is fully charged.
Never leave batteries unattended when charging, especially overnight while sleeping.